10KW 450VDC Pure Sine Wave Hybrid Inverter
Main Features
- Pure sine wave max 5000w output
- Max 80A MPPT solar charger (max 5kw PV array)
- Max 450Vdc input
- HYBRID Grid-Tie / Off Grid SOLAR inverter for 48V system
- Parallel support up to 9 units
- Batteryless operation
- Total system max charging: 80A
- Bundled monitoring & setting software
- Supports 50hz or 60hz (program adjustable)
- Grid feedback when there is excess energy
- USB interface available
- Able to use ac grid or generator power
- Timer setting for AC charging & output now available
WARNING:
1. Because this inverter is non isolated, only three types of PV modules are acceptable: single
crystalline, poly crystalline with class A rated and CIGS modules.
To avoid any malfunction, do not connect any PV modules with possible current leakage to the inverter. For
example, grounded PV modules will cause current leakage to the inverter. When using CIGS modules, please
be sure NO grounding.
2.Before connecting to AC in put power source , please install a separate AC breaker between
inverter and AC input power source . This will ensure the inverter can be securely disconnected during
maintenance and fully protected from over current of AC input. The recommended spec of AC b reaker is 16A
for 1.5KW and 32A for 3KW and 5 0A for 5KW
There are two terminal blocks with “IN” and “OUT” markings. Please do NOT mis connect input
and output connectors